411 found, showing page 5 of 11
$5.39
WATERPROOF GREASE
The Danco Waterproof Grease is designed for use as a lubricant for faucets and valve stems. This grease also works good as an installation aid, for inserting parts that will be making a seal and will not be moving again. It is NSF 61 approved and meets or exceeds the requirements of FDA regulation 21. This grease works well in temperatures between -40 to 400 F. Faucet grease can be formulated for many plumbing applications, but this waterproof grease is a perfect lubricant on your faucet or valve stems.
View Details
$11.79
PLUMBING REPAIR KIT
Washer assortment contains assorted washers, screws, and packing for repairing faucets, toilets, sink traps, and valves. Packaged in clear plastic hanging box. Do it carded.
View Details
$7.49
3/8x1/2x12 FAUCET CONNECTOR
3/8" x 1/2" Faucet connector. Braided stainless steel wrapped around reinforced braided PVC with brass hex connector nuts. Approved for residential, commercial, and industrial applications for water supply connections to fixtures. Core is Virgin PVC with polyester yarn braiding over-braided with stainless steel 304 for strength and durability, chrome-plated brass nuts, and washers for a dependable hand-tight seal. Max Temp 180 F (degree Fahrenheit). Max Pressuer: 125 psi (pounds per square inch. IAPMO (International Association of Plumbing and Mechanical Officials) listed.
View Details
$8.49
3/8x1/2x16 FCT CONNECTOR
3/8" x 1/2" Faucet connector. Braided stainless steel wrapped around reinforced braided PVC with brass hex connector nuts. Approved for residential, commercial, and industrial applications for water supply connections to fixtures. Core is Virgin PVC with polyester yarn braiding over-braided with stainless steel 304 for strength and durability, chrome-plated brass nuts, and washers for a dependable hand-tight seal. Max Temp 180 F (degree Fahrenheit). Max Pressuer: 125 psi (pounds per square inch. IAPMO (International Association of Plumbing and Mechanical Officials) listed.
View Details
$9.99
3/8x1/2x20 FCT CONNECTOR
3/8" x 1/2" Faucet connector. Braided stainless steel wrapped around reinforced braided PVC with brass hex connector nuts. Approved for residential, commercial, and industrial applications for water supply connections to fixtures. Core is Virgin PVC with polyester yarn braiding over-braided with stainless steel 304 for strength and durability, chrome-plated brass nuts, and washers for a dependable hand-tight seal. Max Temp 180 F (degree Fahrenheit). Max Pressuer: 125 psi (pounds per square inch. IAPMO (International Association of Plumbing and Mechanical Officials) listed.
View Details
$17.99
3-WAY DIVERTER
Allows use of both a showerhead and a hand-held personal shower by directing the flow of water.
View Details
$8.49
1/2X1/2X12 FCT CONNECTOR
1/2" X 1/2" Faucet Connector. Braided stainless steel wrapped around reinforced braided PVC with brass hex connector nuts. Approved for residential, commercial, and industrial applications for water supply connections to fixtures. Core is Virgin PVC with polyester yarn braiding over-braided with stainless steel 304 for strength and durability, chrome-plated brass nuts, and washers for a dependable hand-tight seal. Max Temp 180 F (degree Fahrenheit). Max Pressure: 125 psi (pounds per square inch) IAPMO (International Association of Plumbing and Mechanical Officials) listed.
View Details
$12.29
1/2x1/2x24 FCT CONNECTOR
1/2" X 1/2" Faucet Connector. Braided stainless steel wrapped around reinforced braided PVC with brass hex connector nuts. Approved for residential, commercial, and industrial applications for water supply connections to fixtures. Core is Virgin PVC with polyester yarn braiding over-braided with stainless steel 304 for strength and durability, chrome-plated brass nuts, and washers for a dependable hand-tight seal. Max Temp 180 F (degree Fahrenheit). Max Pressure: 125 psi (pounds per square inch) IAPMO (International Association of Plumbing and Mechanical Officials) listed.
View Details
$26.99
*3/4X3/4X18 WTR CONNECTOR
Water heater connector. Braided stainless steel wrapped around reinforced braided PVC with brass hex connector nuts. Approved for residential, commercial, and industrial applications for water supply connections to fixtures. Core is Virgin PVC with polyester yarn braiding over-braided with stainless steel 304 for strength and durability. Chrome-plated brass nuts and washers for a dependable hand-tight seal. Max Temp: 180 F (degrees Fahrenheit); Max Pressure: 125 psi (pounds per square inch). IAPMO (International Association of Plumbing and Mechanical Officials) listed.
View Details
$14.99
PFISTER FAUCET HANDLE
Tub/shower clear acrylic handle fits Price Pfister Contessa/Windsor. Includes hot, cold, and arrow buttons for 2-handle faucets. Clamshell.
View Details
$7.79
*SHOWER FLOW CONTROL
Cuts water usage by 50\% by limiting the flow of water through the showerhead. Chrome-plated. 1/2" F.I.P. x 1/2" M.I.P. to fit standard shower arms. 2.1 GPM, maximum 2.5 GPM (gallons per minute). Carded.
View Details
$21.49
3/4X3/4X18 WTR CONNECTOR
Water heater connector. Braided stainless steel wrapped around reinforced braided PVC with brass hex connector nuts. Approved for residential, commercial, and industrial applications for water supply connections to fixtures. Core is Virgin PVC with polyester yarn braiding over-braided with stainless steel 304 for strength and durability. Chrome-plated brass nuts and washers for a dependable hand-tight seal. Max Temp: 180 F (degrees Fahrenheit); Max Pressure: 125 psi (pounds per square inch). IAPMO (International Association of Plumbing and Mechanical Officials) listed.
View Details
$29.99
3/4X3/4X24 WTR CONNECTOR
Water heater connector. Braided stainless steel wrapped around reinforced braided PVC with brass hex connector nuts. Approved for residential, commercial, and industrial applications for water supply connections to fixtures. Core is Virgin PVC with polyester yarn braiding over-braided with stainless steel 304 for strength and durability. Chrome-plated brass nuts and washers for a dependable hand-tight seal. Max Temp: 180 F (degrees Fahrenheit); Max Pressure: 125 psi (pounds per square inch). IAPMO (International Association of Plumbing and Mechanical Officials) listed.
View Details
$16.99
3/4x3/4x18 WTR CONNECTOR
Water heater connector. Braided stainless steel wrapped around reinforced braided PVC with brass hex connector nuts. Approved for residential, commercial, and industrial applications for water supply connections to fixtures. Core is Virgin PVC with polyester yarn braiding over-braided with stainless steel 304 for strength and durability. Chrome-plated brass nuts and washers for a dependable hand-tight seal. Max Temp: 180 F (degrees Fahrenheit); Max Pressure: 125 psi (pounds per square inch). IAPMO (International Association of Plumbing and Mechanical Officials) listed.
View Details
$18.49
3/4x3/4x24 WTR CONNECTOR
Water heater connector. Braided stainless steel wrapped around reinforced braided PVC with brass hex connector nuts. Approved for residential, commercial, and industrial applications for water supply connections to fixtures. Core is Virgin PVC with polyester yarn braiding over-braided with stainless steel 304 for strength and durability. Chrome-plated brass nuts and washers for a dependable hand-tight seal. Max Temp: 180 F (degrees Fahrenheit); Max Pressure: 125 psi (pounds per square inch). IAPMO (International Association of Plumbing and Mechanical Officials) listed.
View Details
$6.69
DELTA SEAT-SPRINGS
Seats and springs for Delta . Universal - long and short seats, long and conical springs.
View Details
$16.99
PFISTER SINGLE HANDLE
Replacement Price Pfister single handle for lavatory and tub/shower.Fits Pfister Avante lavatory, tub, and shower faucets.
View Details
$17.99
*AMER STND HANDLES
Metal handles for American Standard Colony bath. 1 pair per card.
View Details
$21.99
PFISTER UNIVERSL HANDLES
Clear universal handles. A pair of 10-point for Price Pfister Windsor/OEM style.
View Details
$11.29
PFISTER T/S FLANGE**************
Chrome replacement bath escutcheon set for Price Pfister Verve tub/shower faucets. Fits stems: 12H-1, 12H-2, 12H-4 & 12H-18. Set contains 1 each: Carded Stock No. 88535, Part No. 960-110A, Handle Flange; Carded Stock No. 88395 (1) 23810 (2), Part No. 972-100, Flange Nipple.
View Details
$26.49
CHR TUB SPOUT W/DVTR
Repair or replacement bathtub spout will fit 1/2 In. copper, 1/2 In. male threaded (front or rear), or 3/4 In. male threaded stub outs. Adapters included to fit all the most popular bathtub spout inlets (stub outs).
View Details
$11.99
20" TOILET CONNECTOR
No-Burst connector. 1 connector fits 4 shut-off valve sizes: 3/8", 7/16", 1/2" Male compression and 1/2" Male iron pipe. 7/8" Female nut with ballcock thread on other end. Stainless steel connector with nickel-plated brass water supply hex nut. Stainless ferrules are extra long, with more crimps. Exceptional flexibility, won't kink, fast, easy installation. 5 year warranty.
View Details
$89.99
BANBURY 2H BN LAV FCT
Banbury lever style 2-handle lavatory faucet. 1.2 GPM (gallons per minute) flow rate. ADA compliant. Low arc design for conventional styling. Meets WaterSense criteria to conserve water without sacrificing performance. For replacement cartridge see Model No 1224. Limited lifetime warranty.
View Details
$219.99
1H SRS KITCHEN FAUCET
Anabelle classic stainless steel 1-handle pull-down kitchen faucet. High arc spout, 1-handle lever design. 1.5 GPM (gallons per minute) flow rate. LifeShine finish guaranteed not to tarnish, corrode, or flake off. Spot resistant. Aerated stream, patented pause function, powerful rinse, includes soap/lotion dispenser. ADA (Americans with Disabilities Act) compliant, Hydrolock quick connect system for easy installation. For replacement cartridge see Model No 4000 (SKU 464447). Lifetime limited warranty.
View Details
$13.99
PFISTER HANDLE KIT
Chrome handles for Price Pfister Verve. 2 per card.
View Details
$59.99
*HARDEN STEM******
Stem for 8Z-11H Harden. Clamshell.
View Details
$65.99
*HARDEN STEM*****
Stem for 8Z-11C Harden. Clamshell.
View Details
$24.99
STERLING STEM
10L-15 H/C stem for Sterling sink, bathroom sink, laundry, and bar. Clamshell.
View Details
$12.29
3/8" GAS VALVE
Heavy forged brass construction with 1-piece body. Hard chrome-plated forged brass ball, coated aluminum handle. A.G.A.certified for use with natural, manufactured, mixed, liquified petroleum and LP gas/air mixtures up to 2 P.S.I. and temperatures up to 175 deg. F. UL listed for use with water up to 175 P.S.I. Threaded ends comply with ANSI B2.1. Both endsare Female pipe thread. Import.
View Details
$4.99
*STEM INDIANA BRAS*********
Danco seat model No. 48.
View Details
$27.49
*STERLING STEM
Danco seat model No. 18. Diverter 10L-3D.
View Details
$21.99
PFISTER KITCH/LAV HANDLE
Chrome-plated metal. Fits kitchen and lavatory faucets. Includes hot/cold buttons and stem screws. 1 pair per card.
View Details
$22.99
PFISTER TUB/SHWR HANDLE
Temperature control handles, model No. PP21H. OEM style metal verve tub/shower handle for Price Pfister brand. 2 handles per package, (1) hot and (1) cold. For replacement index buttons: Hot button, cold button, or for diverter handle order, see Related Items. Each sold separately. Carded.
View Details
$21.49
*HANDLE DELTA CRYST RPLCMNT
Clear, Lucite finish. Fits Delex kitchen, lavatory, and some bath faucets. Includes hot/cold buttons and stem screws. 1 pair per card.
View Details
$37.99
CHROME "S" SHOWER ARM
S shower arm. Chrome finish. For use with 6" sunflower shower head not included. 15" length. Clam shell packaging.
View Details
$14.99
7' SHOWER HOSE
Mylar 84" antitwist shower hose with vacuum breaker. Limited lifetime warranty. Clamshell packaging. See Model No. 80925 (SKU 400249) for replacement washers.
View Details
$11.79
1/2" FIP HOSE VALVE
Solid brass hose bibbs with Female threads help prevent your hose from kinking when in operation. Brass tee handles for easy operations. Import.
View Details
$12.79
3/4" FIP HOSE VALVE
Solid brass hose bibbs with Female threads help prevent your hose from kinking when in operation. Brass tee handles for easy operations. Import.
View Details
$22.99
GERBER STEM
Danco seat model No. 28. Constructed of durable brass. For Gerber tub and shower OEM E4800 Series. Diverts water from the tub spout to the shower head. Includes faucet seat. ID length 11, broach B. Complies with the reduction of lead in drinking water act.
View Details
$1.99
*HARCRAFT BIBB SEAT*******
*HARCRAFT BIBB SEAT*******
View Details
